DC-Pit Dimensioning – Option for DC-Pit

DC-Pit/Dimensioning is an add-on option to the DC-Pit program and can be used to design the wall types, infilling, anchors and booms.

• Automatic transfer of the internal forces and the anchor forces from DC-Pit
• Design of the wall types: bore pile walls, diaphragm walls, sheet piling, girder plank walls, MIP (Mixed In Place) walls
• Selection of predefined sheet piling types and beam sections (HE-A etc.)
• Bore pile wall: reinforced concrete design of the piles, design of the pile infilling with secant piles, design of straight or curved infilling with relieved bore pile walls
• Diaphragm walls: reinforced concrete design
• Sheet piling: steel design
• Girder plank walls: steel design of the girders, design of the infilling of timber, shotcrete or steel
• MIP: analogous to the design of bore pile walls with concrete infilling
• Anchor: anchor steel and grouted anchor body, design of the grouted body based on the diagrams by Ostermayer or on the specification of the skin friction
• Anchor forces optionally for a suitability or acceptance test or the anchor failure analysis
• Design of the inserted I-beam restraint for a girder plank wall on a bore pile wall or a diaphragm wall
• Design of the booms with different profiles
• Suggestion of the required girder/profile
• Optional graduation of the reinforcement over the envelope line of tensile force with DC-Reinforcement
• Serviceability verifications for reinforced concrete with DC-Crack on option
• Licences for the design of the different wall types are also individually available
• Detailed output with texts and graphics
• Only available in combination with DC-Pit

DC-Software offers both perpetual and subscription licensing model.